Id of the VoIP settings (APPID)
ID for the VoIP settings.
Default: w9013. (This is the standard OMA value for APPID that corresponds to VoIP settings.)
Provider of the settings (PROVIDER-ID)
Text, the maximum length is 32.
Provider of the VoIP profile settings as described in Open Mobile Alliance, Provisioning Content, OMA-WAP-ProvCont-v1_1-20050428-C, available at Candidate Version 1.1 – 28 Apr 2005.
Name of the settings (NAME)
Text, the maximum length is 32.
Based on the provisioning parameter NAME as described in Open Mobile Alliance, Provisioning Content, OMA-WAP-ProvCont-v1_1-20050428-C, available at Candidate Version 1.1 – 28 Apr 2005.
Default: VoIP settings.
Start media port number (SMPORT)
A number in range of 1024—65535.
The lower limit of the RTP port range.
Default value: 16384.
End media port number (EMPORT)
A number in range of 1028–65535.
The upper limit for the allocated RTP ports. The value must be at least 4 greater than the ‘Start media port number’ to guarantee two simultaneous calls.
Default value: 32766.
Media QoS (MEDIAQOS)
A number in range of 0–63.
Quality of Service for VoIP media — the DiffServ Code Point (Diffserv, DSCP bits) QoS values to be used in IP headers (IPv4 TOS and IPv6 TC).
Default value: 46.
No DTMF out of band signaling (NODTMFOOB)
When this parameter is defined DTMF out-of-band is disabled.
Default: Parameter is not defined.
Predefined payload type for DTMF (DTMFPAYLOADTYPE)
A number in range of 96-127 (dynamic payload type range).
With this parameter payload type for DTMF (telephone-event) can be predefined.
If this parameter is not defined, codecs with dynamic payload types will get numbers starting from 96 according to the order of codecs in the provisioned settings with the exception that the DTMF (telephone-event) gets the last value.
Default: parameter is not defined.
Secure call preference (SECURECALLPREF)
0 — Non-secure call is preferred.
1 — Secure call is preferred in MO (Mobile Originated) calls.
2 — Security is mandatory for call establishment in MO calls.
Default value: 0.
RTCP reporting (RTCP)
This setting enables the Real Time Transport Control Protocol (RTCP) reports, as defined in the IETF RFC 3550. Possible values are:
0 — RTCP reporting is disabled.
1 — RTCP reporting is enabled.
Default value: 0.
RTCP extended reporting – VoIP metrics (RTCP-XR-VOIP-METRICS)
This setting enables the Real Time Transport Control Protocol Extended Reports (RTCP XR) VoIP metrics, as defined in the IETF RFC 3611. Possible values are:
0 — RTCP extended reporting for VoIP is disabled.
1 — RTCP extended reporting for VoIP is enabled. Requires that RTCP reporting is also enabled.
Default value: 0.
MO maximum alerting time (MOMAXALERT)
Maximum time waited in an MO call if alerting call is not answered by the MT (Mobile Terminated) end. The call is released after the time has expired. Possible values are:
Value in seconds: 0 to 255 (0 means the feature is disabled).
Default: 45.
MT maximum alerting time (MTMAXALERT):
Maximum time waited if an MT call is not answered. The call is released after the time has expired. Possible values are:
Value in seconds: 0 … 255 (’0’ meaning feature is disabled).
Default: ‘30’.
Forward Error Correction (AMR-FEC)
When this parameter is defined, Forward Error Correction (FEC) is enabled for the AMR-NB codec in the uplink direction according to RFC4867 and when not defined FEC is disabled. Possible values are:
0 — Reserved for future use.
1 or 2 — Depth of FEC used in the uplink.
Default: Parameter is not defined.
Forward Error Correction (AMR-WB-FEC)
When this parameter is defined, Forward Error Correction (FEC) is enabled for the AMR-WB codec in the uplink direction according to RFC4867 and when not defined FEC is disabled. Possible values are:
0 — Reserved for future use.
1 or 2 — Depth of FEC used in the uplink.
Default: Parameter is not defined.
Web link to service provider (PROVIDERURI):
When this parameter is defined, the VoIP provider’s account option in the phone UI has a link to the service provider’s web page. If the parameter is not defined or no URI is provided, the VoIP provider’s account option in the phone UI doesn’t have a link to the service provider’s web page.
URI — service provider’s web page.
Default: Parameter is not defined.