PAN (Personal Area Networking) tab

The PAN (Personal Area Networking) tab provides options which are used for configuring the Bluetooth and Infrared connections for the emulator. By setting these options you can enable Bluetooth and IrDA connections to the emulator.

Figure 17: PAN (Personal Area Network) tab

For configuring a Bluetooth connection:

Option field	Description
Bluetooth	Sets the used Bluetooth connectivity configuration. COM: Physical com port used by the Bluetooth card. Sets the hci setting in the `\Epoc32\Winscw\c\System\Data\bt.esk` file. HCI: Bluetooth stack (BCSP or H4) Sets the protocol stack that the emulator uses to communicate with Bluetooth hardware. The default is the BCSP protocol stack.
IrDA	Sets the used infrared connectivity configuration. Physical com port used by the Ir Pod. The emulator uses serial communications to interface directly with the PC’s hardware, which means that an Ir Pod connected to the COM port should be used.

Option field

Description

Bluetooth

Sets the used Bluetooth connectivity configuration.

COM: Physical com port used by the Bluetooth card. Sets the hci setting in the \Epoc32\Winscw\c\System\Data\bt.esk file.

HCI: Bluetooth stack (BCSP or H4)

Sets the protocol stack that the emulator uses to communicate with Bluetooth hardware. The default is the BCSP protocol stack.

IrDA

Sets the used infrared connectivity configuration. Physical com port used by the Ir Pod. The emulator uses serial communications to interface directly with the PC’s hardware, which means that an Ir Pod connected to the COM port should be used.

The settings are activated after emulator restart.

For more detailed configuration instructions, see Configuring Bluetooth.